MNR Vortx 2018 spec CBR1000RR ++++SOLD++++

MNR Vortx 2018 spec CBR1000RR ++++SOLD++++

Regular price
Sold out
Sale price
Quantity must be 1 or more


With the updating of our Vortx range for 2019 we have available a very high spec car

This is a brand new car built car from our 2018 range , the car itself was originally factory built for racing / trackdays at the beginning of 2018 , it has never been used,

Complete build spec and parts included / fitted

  1. Vortx RT Plus Chassis with full Msa / Fia Rollcage , with detachable side door bars , fully rosejointed suspensionInboard front and rear suspension with anti rollbars front and rear
  2. Cbr1000rr engine ( was fully rebuilt by dynobike malton ) , fitted with cbr1000rr billet sump and oil cooler take off , water pump delete, bosch electric water pump , complete with throttle bodies, airbox ecu and loom , modified airbox with ram air intake , itg air filter and velocity stacks.power commander 5
  3. Complete aluminium panel set riveted and bonded in gloss black
  4. Complete fuel line and brake line kit fitted including braided brake hoses 
  5. Fuel tank with swirlpot and pressure regalator, fuel pump
  6. Complete pedal box setup including master cylinders, fluid reservoir, clutch and throttle cable, remote bias adjuster
  7. Front lower rosejointed wishbones complete
  8. Front toprosejointedwishbones complete
  9. Front fabricated race uprights complete with stub axles, aluminium hubs, solid disks , wilwood 4 pot calipers and mintex 1144 pads 
  10. Escort high ratio steering rack with alloy mounts , including alloy rack extensions and rose jointed steering arms  
  11. Steering column to steering rack link and joints
  12. Steering column with quick release
  13. Full stick shift gearchange including cable 
  14. High efficiency alloy radiator and cooling fan
  15. 13 row oil cooler
  16. sierra 3.38 differential with quaiffe atb fully rebuilt
  17. sierra driveshafts fully rebuilt
  18. rear lowerrosejointedwishbones complete
  19. rear toprosejointedwishbones complete
  20. Rear race upright assemblies
  21. Billet alloy rear bearing housings
  22. Machined rear drive flanges
  23. Billet front and rear disc and bell assemblies
  24. Wilwood powerlight calipers all round 
  25. Line lock  
  26. Digidash pro with steering wheel buttons and data logger 
  27. Sealed gel battery
  28. Full new vortx bodywork in gray and black
  29. 4 x team dynamics pro race 1.2 wheels with part worn track day tyres
  30. Exhaust manifold 4 into 2 into 1 and silencer
  31. Fiberglass race seats ( drivers side on seat runner )
  32. Trs 6 point harness
  33. trs 4 point harnessiva suitable( passenger side ) 
  34. All led rear lights 
  35. Side repeaters and front indicators ( not fitted but included )
  36. Front headlights ( not fitted but included )
  37. All carbon fibre effect mirrors ( not fitted but included )
  38. Full wiring harness
  39. bonnet catches (aerocatch) 
  40. all alloy hardline water hoses
  41. black silicone hoses throughout
  42. aluminium header tank
  43. 44. all aluminium oil hose fittings
  44. 4 x team dynamic pro race 1.2 wheels with trackday tyres
  45. aero fuel filler cap
  46. gloss black aeroscreen ( not fitted but included )
  47. included but not fitted is a 2.25 litre plumbed in fire extinguisher ( if it is going to be ivad it needs fitting afterwards hence why its not currently fitted )
  48. 2 piece propshaft
  49. electric reverse


To build to this specification from new would be well over 25k 


This is a complete car but is currently not road registered

Items that will need changing for iva 

  1. conventional handbrake fitting
  2. Immobiliser and ignition key  
  3. Switches for lights operation 
  4. Alteration to wiring loom for iva compliance 


we can do the above work at extra cost and also the iva registration if needed :- please ask